In part one you saw how to prepare a Fluid Validation analysis case. After running the simulation, the post-processing can be easily managed through the Results tab in the Action bars.
Different contours can be plotted from the Plot floating bar. Post processing options include History Output graphs, Cutting Planes, Spectrum Colours definition, Stream Line creation and definition, among others.
From the View tab, set the view mode to Perspective and navigate through the Fluid Domain to observe the results from up close.
The FORCE variables requested as a History Output can be visualized by plotting the results against Increments using the History Plot option.
In this graph, the Purple curve represents the Force on Component 3 (Z, Downforce), the Pink represents the Force on Component 1 (X, Drag), and Light Blue represents Component 2 (Y). Therefore, there is actual downforce generation according to the results.
In the end, the process is very simple by just following the Simulation Assistant. This can allow you to perform quick analyses and aid to a faster decision making process when engineering a product.
For further information or if you have any questions, please leave a comment below or email firstname.lastname@example.org.
CATIA V5 has been revitalised for 2018 and beyond, with the introduction of "Power’By" 3DEXPERIENCE (available February 2018)...