Design optimisation is the process of finding the best design parameters that satisfy project requirements. Optimisation of parameters, whether “minimisation”, “maximisation” or “approaching a target value” is an iterative process. Using the conventional, manual approach can be time consuming and tedious.
In a previous post, only parameters and measures were used to perform the design optimisation. This time, the optimisation loop will include FEA (finite element analysis).
FEA is generally used to validate a design by simulating the loaded condition of a design in order to predict the stress, strain and displacement values. Iterations are needed to reach a target or to minimise a value. The CATIA Design optimisation module, “product engineering optimiser” is found within the “knowledgeware” module. It allows the user to deal with FEA analysis inside the optimiser tool in order to significantly reduce design time.
The following video shows how to use the optimiser module combined with the Generative Structural Analysis module.
If you would like to learn how to perform FEA with the Generative Structural Analysis module in CATIA V5, please visit our Training Section and have a look at our CATIA V5 Generative Structural Analysis Training Course.
CATIA V5 has been revitalised for 2018 and beyond, with the introduction of "Power’By" 3DEXPERIENCE (available February 2018)...